Products

Clamps[21]
Bedroom Furniture[7]
Other Hand Tools[4]
Bookcases[5]
Candle Holders[2]
Air-Compressor Parts[1]
Cast & Forged[5]
Inductors[3]
Electric Drill[2]
Mazut[1]
Living Room Sofas[1]
Keyboards[4]
Springs[1]
Other Bedroom Furniture[2]
Other Tools[2]
Other Hardware[3]
Nuts[1]
Industrial Supplies Projects[1]
Service Projects[9]
Pipe Making Machinery[1]
General Industrial Equipment Processing Services[6]
Construction Projects[1]

Contact Person : Ms. Dong Beatrice
Company Name : Tianjin Xiangyue Sealing Material Co., Ltd.
Tel : 86-22-23301140
Fax : 86-22-28350013
Address : Tianjin,tianjin,NO.14 nanjing road
Country/Region : China
Zip : 300402

Pressure Sealing Hand Pumps / Leak Sealing Hand Pump

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Bedroom Furniture

Detailed Product Description

Hand Pumps

1.Brief:
P-72manual lubropump is a kind of hydraulic power unit which transfers mechanical energy generated by hand into power created by the pressure of oil inside the pump
P-72 enjoys a variety of merits:
1>generating power by hand
2>creating high pressure by pressing the handle with relatively less strength than usual
3>light enough to carry
4>small size
5>widely used in many fields

2.Capability and specification
Portable manual lubropump P-72
Pressure High pressure Mpa 70
Low pressure 1
Flux High pressure cm3/time 3.1
Low pressure 12.5
Maximum pressure on the handle kg 44.00
Weight kg 4.0
Size(length x width x height) mm 612x140x141
Output volume of oil cm3 902

3.working principle
1> To add oil. When starting work, the oil is pressed through one-way valves of low pressure and high pressure into the tube connected with the selant injection tool.
When the pressure achieves over 1Mpa,the low pressure valve is opened and through the valve returns the oil in the low pressure tube back into the oil tank.

2> To raise pressure: as the high pressure plunger works, pressure increases until it reaches 70 Mpa. At this pressure unit, the high pressure valve, acting as the security valve,returns to the oil tank and thus,the pressure remains 70Mpa.

3>to use it.Asthe flunger does work, the energy decreases. So please keep pressing the handle in order to keep the pressure lingering at the required level until the work is completed.

4> to release pressure: after work, as release valve is opened, the pressure decreases gradually to 0 Mpa and the oil goes back to the oil tank.

In fact,the 4 steps mentioned above are indispensible and what you need to do is to keep pressing the handle to complete the process.